Roxor Heater Kit
Add heat to your ride quickly and easily with a Universal Compact Gen 1 or Gen 2. These kits are available in heater only or heater with defrost/under dash vent configurations.
Gen 1 heater kit does not include dash vents or defrost vents.
Gen 2 heater kit has three options, either defrost vents, Under dash vents, or thru-dash vents.
Roxor Auxiliary Heater
Mountable Fan Switch
Four Way Heater Valve W/switch
Auxiliary Heater W/universal mounting plate
This heater will need Modification to mount correctly in your Roxor.
Roxor Heat Demon Seat warmers
Fits any vehicle with a battery
Two (2) 10" x 9" carbon fiber seat heaters
Two (2) pieces of foam
Two (2) 24" quick disconnect extension cables
Two (2) sealed On/off round rocker switch
Maximum 30 watts at 14 volts
Kit includes everything needed for a simple installation
The system comes with a Marine Switch that activates the Turn Signal System and also Indicates with a flashing arrow. It is Easy to install with no wires to cut and no crimping. The system comes with a pre-made wire harnesses that interfaces with the OEM harness. Just unplug the rear light harness connector and plug our harness in, it’s that easy! The brake lights work as turn signals just like a car, including Hazard Lights. Since these vehicles are used primarily for off road use, the lit dash switch is more practical over those cumbersome turn levers that break off. It includes a lit Hazard Switch and rear power out for the license plate light or whip light.
Includes two 1.25" 6 LED front Amber Lights
Plugs into OEM Brake Light Harness, using Factory Rear Lights
Laser Etched LED Lit Turn Switch
Lit Emergency Hazard Switch
Rear Power Out for optional license plate light
On the Rox’s in-house developed signal harness that has been specifically designed for the Mahindra Roxor. This kit features a Grote brand column mounted signal switch with four way operation, reproduction Willy’s signal lights, and all of the connections and components needed to professionally splice into the factory wiring harness. This kit can be used with the factory Mahindra grille, as well as our “Classic” aftermarket grille. Installation time takes about 2 and a half hours, by following our downloadable PDF instructions.
This Triple Row 3inch Square LED Lights Pods uses powerful Philips LED bulbs to offer bright illumination, that’s sure to turn night into daylight. Highly durable, the LEDs are proven to last for years to come, as much as 50,000 hours or more ,so you’ll never need to change them. This light features a spot & flood Combo beam pattern that produces extremely wide beams of light to light up a wide area. This makes it perfect for illuminating trails with overhead tree limbs that you want to see. With efficient lights encased in an extremely robust die-cast aluminum housing, this light is proven to endure year in and year out. It comes with all the necessary hardware and instructions to ensure easy installation.
Eight high-intensity LEDs(96W LEDS) to provide 9,600 Lumens of bright light
Flood Spot beam pattern to deliver exceptional wide range illumination
Die-cast aluminum housing for maximum strength and heat dissipation
Engineered to ensure years of hassle-free performance beyond 30,000 hours
Mounting hardware included for easy installation
D Series PRO | Spot Midnight Edition
With Rigid Industries exclusive Hybrid Spot Optic and a transparent black enamel coating, D-Series Pro Midnight Edition lights are all about stealth. From black oxide hardware to dark gray screen-printed and black embossed logos on the bezel, these lights are designed to take the subtle “blacked out” look seriously. They will be invisible during the day, while providing powerful illumination at nighttime thanks to advanced LED technology. The D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology.
Universal D-Series Pro Midnight Edition 3" 22W Spot Beam LED Light by Rigid Industries®.
1 Piece, 4-LED.
Black housing, white light.
Beam distance: 423m (0.25 lux); 211m (1 lux). 1.5A.
Raw lumens: 2508.
Roxor Tactical Headlights
High-Performance led lamps, Black durable aluminum housing,shock-proof waterproof(IP67), 6000K, More than 50,000 hour lifespan
Strong brightness 105w, 5watts real Osram led chips, 5500LM for high beam, 3600LM for low beam, more than twice brightness than stock light, safe for road use!
With rebreather, don't have to worry about the fog inside when there's a big difference between inside temperature and outside temperature
DOT approval, legal for on road use. Day light and turn light included, white for DRL, amber for turn signal.
Packing Included: two 7 Inch LED headlight + two H4 to H13 plugs
MODIFICATION IS REQUIRED FOR PROPER FITMENT
Roxor Halo Headlights
7 Inch Headlights with Multi-color Halo Ring Bluetooth & App Controlled
Bluetooth or Cell Phone App Control for: color changing, blinking, flashing, brightness. Multi- function: High/Low Beam Light, integrated halo Turn Signal Light.
Operating Lumens Output: 3600 LM (High Beam),
1800 LM (Low Beam),
Water -proof IP67,
Operating Voltage: 9-32V DC
MODIFICATION IS REQUIRED FOR PROPER FITMENT
Roxor OBDII Adapter Cable
Want to hook up a diagnostic tool, scanner, or GPS tracker to your Mahindra Roxor?
Our Roxor OBDII Cable will allow various scanners and accessories to be plugged into the Roxor’s stock Marine-style diagnostic port for use of OBDII scanners and accessories. This high-quality harness is custom-made for the Mahindra Roxor, with Marine-grade materials designed to withstand the elements and an an extra-long cable for remote mounting of readers and accessories.
A good OBD2 scanner puts the dealership’s diagnostic power in the palm of your hand. Detect issues, codes, and check engine lights on the fly. The Roxor OBD2 Adapter Cable will also support readout for:
Average fuel consumption
Fuel system information
Roxor ScanGauge II
Wish your vehicle had some of the electronic wizardry reserved for expensive luxury cars? If so, the ScanGauge II OBD-II Scanner is your ticket to computerized motoring. Simply plug the ScanGauge II into your vehicle's ODB-II port-and instantly-you have a powerful 3-in-1 automotive computer right at your fingertips.
The ScanGauge II OBD-II Scanner packs the power of a trip computer, digital gauge display and diagnostic scan tool into one compact unit. In Trip Computer mode, the ScanGauge tracks and delivers three sets of trip data in real time. The Digital Gauges mode displays 4 of 12 built-in -time gauge readouts, and the Scan Tool mode lets you read trouble codes and diagnose costly problems before they get worse.
Roxor Edge Engine Monitor
Observe and understand your vehicle’s parameters using Edge’s state-of-the-art technology. Our Insight CTS2 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This digital gauge display works great with custom tuning products or as a stand-alone monitor for total insight on how your vehicle is performing.
* Requires our Roxor OBD Port Adapter to interface.
Roxor Tune Package
To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then Priority mail it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.
Stage 1 Tune +36HP
Stage 2 Tune +48HP
EGR delete “exhaust gas re-circulation” is optional on either stage tune.
For any custom request please call before placing order.
Roxor 2.5" Full Exhaust
The Exhaust system on the Roxor is quite restrictive, when tuning the engine for more power it is important to increase airflow to minimize the EGT’s. Our system provides the least resistance to flow and is 100% Bolt-on. Not only does it provide maximum flow but it also gives the vehicle an awesome sound. Let the turbo sing!
The Turbo back exhaust system is manufactured in the USA with a CNC mandrel Bender. It consists of 2.5″ aluminized steel tubing with a Tig welded steel flange designed to mate to the factory turbo outlet. They can be ordered with or without a 2.5″ high flow Turbo Muffler and inlcude the clamps necessary for a bolt-in install in minutes.
Roxor EGR Block Off Plates
Mahindra Roxor EGR Delete Kit. Both exhaust and intake side block plate’s. Works with your factory gaskets and hardware.
Roxor E-Fan Conversion Kit
Alumi-Tech's custom built aluminum shroud made to fit the OE radiator of the Mahindra Roxor. The shroud comes with a High Performance SPAL fan and has a 3 year warranty. This conversion will not only out cool the OE fan, it will also free up valuable HORSEPOWER that the OE fan robs. The shroud bolts right up to the OE radiator with no modifications needed. Comes with all the wiring needed to run the electric fan. The sensor included kicks the fan on at 195 degrees and back off at 175 degrees.